Tweet
Originally posted by Special K
burke:
Those carbs won't work too well. 600 carbs are the same OD but smaller ID. They'll physically FIT, but yoru 750 will run like, well..........a 600!
Also, some parts will swap over, but the needles are completely different. You'll find that the floats and such will work........but the top ends are different sizes, and the jets are different, and the..........well, you get the picture!
I have 2 sets of 750 carbs here...........one has started to be cannabilized for parts, but I think its only missing one bottom bowl. The other is whole.
I can clean them up if you're interested, or sell them cheaper as-is.
Either way, if you're interested, PM me.
Those carbs won't work too well. 600 carbs are the same OD but smaller ID. They'll physically FIT, but yoru 750 will run like, well..........a 600!
Also, some parts will swap over, but the needles are completely different. You'll find that the floats and such will work........but the top ends are different sizes, and the jets are different, and the..........well, you get the picture!
I have 2 sets of 750 carbs here...........one has started to be cannabilized for parts, but I think its only missing one bottom bowl. The other is whole.
I can clean them up if you're interested, or sell them cheaper as-is.
Either way, if you're interested, PM me.
OH i see, on the 750 carbs i have the throttle plates are all bent up so i doubt i can really reuse those.
so i may have to get one off you special K.
i was hoping since my 600 carbs are already jetted perhaps they would throw enough fuel, guess not. and since the id's are diff then the 600 t-plates wont work either.
thanks for the help guys, i really appreciate it. its good to find such a helpful forum, its getting to be harder these days.
thanks again!
Comment