Tweet
So my bike was runny rouggt so i pulled the plugs and i found that 2 spark plugs were fouled so i replaced them and pulled the carbs or for a cleaning. I found some debre in the two carbs and clean them out and put everything back together. My bike runns better but rev the motor if seams like the rps slowing come back down instead of coming down fast... what do yoy guys think is going on here?
-
-
Make sure the fuel line isn't interfering with the throttle return spring. -
vacuum leakComment
-
Return spring?
I also had to tightin my idel scrweComment
-
This or you're running super lean. Did you remove the plugs over the A/F screws and adjust them to 2.5 turns out?Originally posted by Maverick.Marq View PostComment
-
How did you clean your carbs?"I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
I gonna go out a limb and say he took the bowls off and used a WHOLE can of carb cleaner on them.Originally posted by 92xjunker View Post
Comment
-
Probably so, that's why I asked. I don't get it and never will."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
+1 to vac leak1998 Katana 750
1992 Katana 1100
2006 Ninja 250
2006 Katana 600 RIP - 130k milesComment
Comment