Tweet
I recently changed the gasket on the crankcase cover and it still leaks!! I took it back off and checked the cover for any cracks and i didnt find any. my question is could i have put the gasket on improperly?
-
-
Or one of the surfaces (case, cover) still has residue from the prior gasket and that is causing it to not seal.Originally posted by bspit24 View Post
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!" -
i had given that some thought also being that the old gasket that come off was almost like plastic and i had to scrape it off in some places, i also read that if its not properly clean and dried that it could be an issue?
I appreciate all the help you have given kreyComment
-
Isn't there a screw with a washer that has to go back in a specific spot? That seems to ring a bell...1998 Katana 750
1992 Katana 1100
2006 Ninja 250
2006 Katana 600 RIP - 130k milesComment
Comment