will mod affect carb sync

[shift6]

I recently completed a jet kit mod on my 2006 katana 750 and I have had the carbs synced after.

If i decide to swap out my diaphram springs with difference ones will that affect my carb sync?

Reason I ask, I installed the springs that came with the kit, it was a dyno jet kit. I read that keeping the stock springs that are cut down to 4 inches will provide better low end response since you will need less vacuum to begin getting fuel from the needle circuit.

[arsenic]

If you take the carbs off, you need to resync. If you just swap the spring with the carbs on, then you do not.

[shift6]

solid, the springs are definately something that can be done with just taking the tank off, so I figured I'd change them out and see if it makes any difference.