Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

92 kat 600

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 92 kat 600

    need some help my 92 kat had fuel coming out of the exhaust so i tore the carb down didnt see anything wrong reinstalled and now it will smoke out the exhaust and after fire with flames out the exhaust and will idle but if you give her some throttle she will die any ideas?

  • #2
    Originally posted by num1streetking View Post
    need some help my 92 kat had fuel coming out of the exhaust so i tore the carb down didnt see anything wrong reinstalled and now it will smoke out the exhaust and after fire with flames out the exhaust and will idle but if you give her some throttle she will die any ideas?
    Need to clean and rebuild the carbs with new parts. Float needles are leaking.

    OR, you aren't running on all 4 cylinders. Use a spray bottle with water and spray it on the head pipes. No sizzle = dead cylinder.
    Last edited by 05RedKat600; 04-28-2012, 04:41 PM. Reason: Automerged Doublepost

    Comment


    • #3
      ok i have cleaned haven't rebuilt yet but still the same problem all 4 head pipes are hot when i flip my carbs upside down and blow threw the lines air does not come out but when flipped up side right air comes out and also when the carbs are installed and im on primary gas will just over take my carbs and flow out both sides is that normal?

      Comment


      • #4
        Overflowing carbs on prime = bad float needles.

        90% of motorcycle forum members do not have a service manual for their bike.

        Originally posted by Badfaerie
        I love how the most ignorant people I have met are the ones that fling the word "ignorant" around like it's an insult, or poo. Maybe they think it means poo
        Originally posted by soulless kaos
        but personaly I dont see a point in a 1000 you can get the same power from a properly tuned 600 with less weight and better handeling.

        Comment


        • #5
          could i replace just the float needle all of my o rings and gaskets are brand new?

          Comment


          • #6
            yeah
            [ame="http://www.amazon.com/gp/product/B001KO0WEE/ref=oh_details_o00_s00_i00"]K&L Supply Float Needle - 5pk. 18-8944[/ame]
            Last edited by arsenic; 04-28-2012, 09:27 PM.

            Comment


            • #7
              k thanks for the help!

              Comment

              Working...
              X