Ok so I have another thread on here about going 45 and it dying on me then only staying running if i am giving it gas. I am starting a new one because no one is replying to my last posts....I have to get this done before morning or i cant make it to work!
So here is what I have done, I took off the gas take, checked the carbs, they are perfect, took apart my petcock, looks perfect yet it still pours gas on all three settings and only runs on prime.
One of the spark plugs, the 4th one wasnt even attached, i attached it. None of the boots from the airbox were attached, i attached them.
One would think if it was running before all that then afterwards it would run great! Nope!
I started her up and it ran fine for a minute then died. I did it again and it runs but after firing a LOT! Also when I give it gas quick it takes a second to rev and also sputters like it is missing or something. Once it warms up the rmps jump to about 3500-4000 and stay there. And last but not least it now takes a bit for rmps to go back down after a rev!
Any ideas? PLEASE HELP!!!
So here is what I have done, I took off the gas take, checked the carbs, they are perfect, took apart my petcock, looks perfect yet it still pours gas on all three settings and only runs on prime.
One of the spark plugs, the 4th one wasnt even attached, i attached it. None of the boots from the airbox were attached, i attached them.
One would think if it was running before all that then afterwards it would run great! Nope!
I started her up and it ran fine for a minute then died. I did it again and it runs but after firing a LOT! Also when I give it gas quick it takes a second to rev and also sputters like it is missing or something. Once it warms up the rmps jump to about 3500-4000 and stay there. And last but not least it now takes a bit for rmps to go back down after a rev!
Any ideas? PLEASE HELP!!!
Comment