Tweet
How do i know and measure exactly how much fork oil that i put in my 06 katana forks? Please help i know i need somewhere around 18 ounces but i need help thanks guys!
-
-
I have a RatioRite pitcher in my shop that I use to measure fluids of all types. Can get them at just about any auto parts store, or bike shop.
[ame="http://www.amazon.com/Ratio-Rite-Measuring-Cup/dp/B0045L9FJM"]Amazon.com: Ratio-Rite Measuring Cup - --/--: Kitchen & Dining[/ame] -
And use a piece of paper to measure from the lip of the tube to the oil. Then you can have them both at the exact same height.Must read for carb tuners......http://www.factorypro.com/tech/tech_...m_engines.htmlComment
-
Awesome guys thanks again!
Comment
-
I use one of these
[ame="http://www.amazon.com/Motion-Pro-Level-Gauge-08-0121/dp/B000WJJ0QO"]Amazon.com: Motion Pro Fork Oil Level Gauge 08-0121: Automotive[/ame]
-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Explain please how that thing works!
Comment
-
You set the depth of the oil from the ring to the end of the metal tube. Set the ring on the top of your open fork tube, use the syringe to draw out fluid. Repeat for the other side, and you have a matched quantity of fluid in your forks.Comment
-
Very nice i will be ordering one of these asap.Comment
Comment