help- turbo with flat slide carbs

[jppower]

I have a 1990 katana 600 engine adapted on a buggy.
I recently installed a turbo setup for blow through on the stock cv carbs.
I just keep getting into problems with the cv’s
I have a friend that has a a mikuni flat slide carbs.
Any help if these will work with the turbo setup as for i don’t want to use the cv. this is just for fun,low boost street.

thanks, Jack

[arsenic]

This is something that anyone who knows what they are doing, knows not to do. I doubt you're going to get much help on this subject.

[Tmod]

Not that this will help any but back when I put a turbo on a yamaha snowmobile using flatslide carbs it would not run correctly, Even the kit developer admitted they screwed up using flatslides. After putting a set of roundslide carbs on it cleaned everything up and ran very well. Also I had put a bypass on it so the turbo would not stall when letting off the throttle suddenly.

Neither were CV carbs BTW.

Tmod

[Jimmie]

Non CV carbs and turbos doesn't mix, at least not on a bike. Forget it or you run the risk of getting seriously injured.

[arsenic]

carbs PERIOD and turbos don't mix. You want to turbo it, rig an FI system.

[il_ragazzo]

ditto^