Originally posted by Asmodeous
View Post
If your choke will not fully reset, then something is wrong. Remove the rail, check the individuals pistons. If they are fine, then put the rail back on. If that is the only change, and it's binding.... check to make sure your rail isn't bent, and it's properly installed. If no binding then, hook the cable up and make sure that works. If binding at this point, check/clean/replace the choke cable. This needs to be fixed, or it's gonna cause lots of issues.
Moving the E-clip down from the top towards the pointy end will richen the mixtures for the main.
Turning the A/F screws out (counter clock wise) will richen the pilot mixture.
Krey
Comment