Tweet
Does replacing the emulsion tubes require synching the carbs afterwards?
-
-
Yes. You'll be servicing the carbs.... and any time you move/remove them you should.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
-
Grr... well that complicates things.Comment
-
Not really. You can bench synch them and get things pretty close... then seek out someone with a set of gauges to do the fine tuning on.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
It won't hurt for sure... you will probably find they are not that far out if you do not remove them from the rails, but... best results say do it.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"Comment
Comment