need a pic of pre 750 carbs

[Rowdy]

specifically the intake side

got a stock air box and it has round holes
go to put it on and the carbs are oval is this correct?
or did they try to put different carbs on it?

i hope all the other parts i got work

[Rowdy]

pics
what carbs do i have?
lol

[Kreylyn]

Look like standard pre kat 90+ carbs to me.

Your bowl drain screws are mixed up though...

Krey

[Rowdy]

hmmm should i really have to stretch the hell out of the air box boots to get them on? they just dont seem to fit?

[Rowdy]

k&n pod that i removed and a pic of the stock air boot, side by side.

[Rowdy]

something is definitely wrong

i can get the boot on stretched to max and tightened with hose clamp and it pops right off

widest point of the carb intake measures 2 and 1/2 inches
widest point of the air boot is 2 inches

[Kreylyn]

600 and 750 intakes are a little different in size, but not that different... I've never put new airbox boots on, so I'm not sure. I would contact customer service where you purchased them to see if they can confirm the size the boots should be.

Also keep in mind that in general, the air box and boots are a pain to get on with older stretched boots... much less new ones.

Krey

[Rowdy]

bought the airbox from hs2020 here
it is used so it should fit right on
the part number on the boots are 13881-19EO
i think the boots for a 750 are 13881-20EO
lol anyone want to swap boots

was all i could do to stretch it over and once on it popped right back off even with the hose clamp on it.

[DumbLuck]

new boots from BikeBandit would run ya about $70. remember, there is a difference between the inner pair and the outer pair