[pveity]

Astro thanks that looks awsome cant wait to get started!!!

[Enjay386]

Astro that is cool with the red indications.

[arsenic]

Yeah saw that but datatool indicater says you need to have a digital dash for it.

uummm....you have one What you need is speed read by a speed sensor, which your is.

[brooder]

From what I can figure Suzuki neutral switch part # 37720-45100 will fit the post Kats and has all the contact pins in place so you don't have to make your own. I have yet to verify this so order at your own risk.

Do you know what bike that comes off of? RonAyers can't find it in the reverse lookup.

Interesting. If you search from the main page (not the fiche) if finds the part. Try to find out what bike it fits and it takes you to the fiche with no results.

[Astro4x4]

I think 85 GS

[brooder]

Just found this one the web:

http://tinymicros.com/wiki/Comp-U-Kat

Apparently this guy has tried and that part number won't work.

* 2008/04/07

The 37720-45100 gear position indicator is not the same diameter as the stock neutral-only sensor. Now I need to find something else, or fab one up.

I'm pretty sure that somewhere in the discussion for the Mr. Clean indicator, there is reference to a bandit or some other cover that is a direct swap. I'm going to have to look now.

[sonosam]

Looked into a couple links on the wiki posted and found that

37720-24A01 - 6 speed from GS1100, supposedly can replace with 37720-48B00, which replaces the 37720-20C00

the 37720-20c00 is for the 98+ Kats according to Ron Ayers
37720-49b00 is for the Pre98 Kats

There is a link also provided on the wiki, i'll provide it here http://home.comcast.net/~gsf1299/BanditGear/
this is to a guy who took the 37720-42a01 part and swapped it with the Pre98 part. So my question to anyone is how different is the Pre part to the Post part?

the fische doesnt do any justice.

Marc

[Astro4x4]

CONFIRMED ! I have part # 37720-24A01 on my 98+ Kat, and functioning as it should.

[BareKat]

Hey Astro, care to fab up another part for a fellow Canuk?

I found a plug and play version from speedohealer for $180can... but I like your price much better.

tx Barekat.

[boxin]

CONFIRMED ! I have part # 37720-24A01 on my 98+ Kat, and functioning as it should.

Hi Astro...
This switch is the same size as the original of +98? This switch has 7 contacts/cables? (0/Neutral+123456)

[bob393]

Old thread but WOW great info.

A gear indicator is one of the few things I envy on the
Honda's and Yamaha's

[Astro4x4]

Hey Astro, care to fab up another part for a fellow Canuk?

I found a plug and play version from speedohealer for $180can... but I like your price much better.
tx Barekat.

Could be convinced, but not until Old man winter gets here. I would actually like to get a circuit board designed and printed for this project but haven't really looked into it much.

Hi Astro...
This switch is the same size as the original of +98? This switch has 7 contacts/cables? (0/Neutral+123456)

Yes, direct swap and yes 7 wires.

[boxin]

Exactly to what bike belongs this switch? I look at Ron Ayers (http://fiche.ronayers.com/Index.cfm/Module/WhereUsed) and I can not find it...

[Astro4x4]

Exactly to what bike belongs this switch? I look at Ron Ayers (http://fiche.ronayers.com/Index.cfm/Module/WhereUsed) and I can not find it...

It's for an '86 Suzuki GS. Ya, Ayers don't have it on the online fiche, but if you order that part number you'll get the right sensor for the project.

[boxin]

Gracias Astro!!!