![Moto 5](https://katriders.com/core/images/smilies/transport031.gif)
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Need Help with clutch issue
Good day all, It seems when I'm at full throttle and just before redline, the engine starts to wind up, I loose power and it seems that the clutch is slipping. I was just in the shop for a tire change and the tech said he noticed it but said it wasn't the clutch. Does anyone know what may be happening? Thanks, Jason
Tags: None
-
For my 2001 Kat rev-limiter is set 500 rpms lower than redline. However, when I hit that limit it causes a stutter in the bike. The whole bike jolts back and forth. What happens is the ignition cuts out two of the cylinders.
Is this anywhere's near what your feeling?
-
Then your clutch is slipping. Try adjusting the cable.90% of motorcycle forum members do not have a service manual for their bike.
Originally posted by BadfaerieI love how the most ignorant people I have met are the ones that fling the word "ignorant" around like it's an insult, or poo. Maybe they think it means pooOriginally posted by soulless kaosbut personaly I dont see a point in a 1000 you can get the same power from a properly tuned 600 with less weight and better handeling.
Comment
-
Originally posted by Private_Eye View PostWhat is the proper way to adjust a clutch cable?02 Katana 600 (weekend toy) 11.892 @ 111.92 MPH
90 GSXR 750/1216
96 Chevy S-10 (work truck)
87 Rear Engine Dragster 8.46 @ 157MPH
sigpic
Comment
-
Parts Fiche #22 shows it to be a replaceable part. Either replace that one piece or buy a complete used cover that has it and install the cover. Then start all over.
You don't state what year your Katana is so I posted the parts fiche for my 2001.Last edited by squiggy; 02-24-2009, 03:22 PM.
Comment
-
Originally posted by Private_Eye View PostI was just trying to back out the screw of the worm gear and it was really tight. The screw head has now broke and I have no way of adjusting it. What should I do know?1992 kawa Zx-7 -750cc
2003 fairings,1995 gas tank,polished frame,muzzy titanium exhaust,Unknown jet kit,520 chain conversion,polished forks,race tail,fcr flatside carbs...
sigpic1989 katana 1100F,v&H exhaust,FP jet kit,FP advancer,avon venom tires,polished swingarm,NRC covers ,big bore kit,manual cam chain tensioner,k&n filters .
Burn rubber, not your soul. Ride among us.
A.S.E. master certified auto tech
Comment
-
If you take the sprocket cover off , you can get the whole assembly out . But if you're having a hard time just getting the clutch adjusted , this MAY be something you'll want some help with , 'cause if you ain't careful about how it goes back together.....
Comment
Comment