Yoshi exhaust

[dhir69]

Hi I want to do a 4 to 1 pipe on my 94 kat and i was wondering if i could get a yoshimure?
CAn anyone tell me if yoshi makes a full system or where i can get headers that would fit up to a yoshi pipe?

[arsenic]

they used to, good luck finding one now Maybe someone here has one. You could always use a 98+ oil pan and pick up and a 98+ header with a yoshi slip on.

[mreedohio]

yoshi made them for the pre98 kats but they are discontinued so your best bet is find one on used on ebay or craigslist. i was lucky enough to find one brand new a couple months back from another kr member. or you could get a post98 header dent the oil pan and get the pick ups then you could buy a yoshi slip on.

[arsenic]

correction: you DO NOT dent the oil pan. To use a 98+ header with a pre 98 oil pan (the cheap way) you dent the collector on the header.

[Kfreak]

[dhir69]

if i do a full system on my 94 kat, i'll probably have to get a jet kit as well, is this right?
i really just want a better sound and a single pipe, instead of the stock duals, does a slip on go from the mid pipe and make it into one pipe? if it does, does yoshimura have a slip on available that will fit a pre kat?

[arsenic]

Yes, a full 98+ exhaust will work, but why No, the pick up is the thing inside the oil pan that actually "pick's up" the oil

[dhir69]

ok i decided i dont want to do a full system but just a slip on, but will the slip on make it one pipe at the back or will it still be 2?..that is will the slip on come with pipes to change it from 2-1??
btw why do i have to change the pickup on my bike for a post 98 exhaust?