Okay guys please don't flame, cuz I am having troubles with this, and I used the Carbs 101 post, as well as my bike's shop manual.... So here's the deal. I have an all stock 1990 600cc Katana. When I bought the bike it didn't come with carbs, and the set of carbs I bought were all in pieces, so I've never had it all together yet. Anyways, I got the carbs together again (after using Carbs 101 to know how to clean), and used my shop manual (to make sure I had all the parts and that they were installed correctly). I took arsenics advice on having the air/fuel pin turned out only 2.5 turns, so I'm pretty sure that's not it.
Having said this... the engine simply does not start. The engine cranks and cranks but will not start. I've used the choke, as well as put new plugs in (gapped properly) and because this is a completly stock bike, I don't assume I have a match up problem (jet kit). I've tried for the past couple days to get it to start and I can't seem to make any head way. I could really use some help. Thanks!
Having said this... the engine simply does not start. The engine cranks and cranks but will not start. I've used the choke, as well as put new plugs in (gapped properly) and because this is a completly stock bike, I don't assume I have a match up problem (jet kit). I've tried for the past couple days to get it to start and I can't seem to make any head way. I could really use some help. Thanks!
Comment