[gmay00]

Do they make them for any pre 98 600..
I'm pretty sure the seats are the same.

I emailed Corbin and asked if they made the Gunfighter for a '90 and they said no. The odd ting is they make it for the 93-95 Kat 750 and 1100, but not the 93-95 600 or any models pre 93. This is my first bike so I'm pretty new to the differences in models but would the 93-95 750 seat fit the a '90 600 model?

[BarMatt80]

the pre98 kat 600 seats are different as they are two pieces instead of one piece like the 750's. So latch and locking mechanism would be different. Their site says that their seat for the pre98 kat 750's only go to like 1994, but that is wrong. As far as i know all pre98 kat 750 seats will work. I had a 1992 kat 750 and i bought one and it fit great. They don't list any earlier they said because they have not fitted them. I told them they did and sent pictures, but they said unless i bring it in, they won't change the site.

[gmay00]

so how much work would matching up a 750 seat to a 600 be?? Would I ned to pretty much replace the whole tail end??

[GytRDunKat]

so how much work would matching up a 750 seat to a 600 be?? Would I ned to pretty much replace the whole tail end??

That may be a tall order. I don't know of anyone that has done it. Seems to me it would be quite a bit of fabrication. I could be wrong.

[gmay00]

ya it sounded like it might be a bit much...just wasn't sure. I haven't really been around Kats (or bikes for that matter) for too long. Figured I could trust you guys on here though...thanks..

[preacherchris]

I have got to repair some of the plastics and probably paint it some cool way. General maintainence since i just got new tires.

[airforceranger49]

hmmm....

long list...


gsxr 1157 engine build and swap,

ohlins suspension (forks, rear shock, new triple trees)

try to mod a custom steering dampner

wave brake discs with brembo calipers and master cylinder

swingarm swap with old gsxr ( want to be able to put atleast a 180 on it once i'm pushing 140+ horses)

fresh paint

chrome rims (maybe)

once all that is done send it off to drastik plastix to have mucho lasercutting and light work done

and the list goes on and on and on...

[tdrcomm]

Retirement.

[VifferJim]

- Contemplating a set of GSXR cams.
- SS Brakelines front and back.
- 12v outlet for GPS.
- Plastic fix (cracks 'n scrapes) and repaint.

[Woodmysta]

hmmm.......MODS MODS MODS!!!!!!

[MMCdude]

got a Corbin on the way
valve adjustment/carb sync
cut off the shovel
add a cigarette lighter/outlet
maybe a new chain & sprockets

[jones20992]

well after i wrote up a list of all the things i want to do to my bike this winter i realized that i would be better off repainting the kat give it to my wife find a frame and harness and start from scratch so with any luck after the first snow 1 bike will go in to the shop and in the spring 2 will come out and 1 will be a gsx600f/bandit1200 streetfighter

[BradsKat]

Once the snow starts:
valve adjustment/carb sync
add a power outlet

and if I can learn how to paint, I want to repaint the frame covers

[Enjay386]

Lots of chrome, finding a seat cowl, undertail, led lights, new gauges, something glow in the dark! rims would be nice, a new helmet.

[BarMatt80]

ss lines
powder coat
renthal ultra low bars
599 dual bulb headlight
HID
PC3 (maybe i doubt... to many problems)
source parts for painting
racetech springs(front)
replace left dust seal on fork
custom brake line holder

well that is more of a complete list i want to do... probably due 3 of them this winter and one next week.