Sprocket and Chain replacement

[L8start]

How difficult is it to replace the chain, front and rear sprockets?

[woobie]

If you have a chain breaker/ press/ riveter changing the chain and sprockets is very easy to do.

I needed to use a 3 foot section of pipe on a rachet to get my front sprocket off, it's torqued down good with lot's of locktite from the factory. The back one pops right off easily.

I'll have to look it up but the only thing you'd probably have to run out and buy is a socket big enough for the front sprocket nut.

If you gonna change your sprockets and chain you may want to see if you need to replace the cush pads too.