*** UPDATES ARE ON THE LAST PAGE ***
--> Pls. go to the last page to see Updated List and how many more we need. Thanks
OK Fellas we can finally get Illumiglow Gauges (after feeling so left out ) well after tons of countless e-mails to StreetRacerParts and not getting any reply, FUNK Them If they dont want my $$$, I sure dont want to give it to them either! Ok I'll stop my biatchin' and get to the good stuff.
Heres what I got from them -
As for the logos, this is the design I sent them (click on the link above or the thumbnails here)
GAS (day) -->
Gas (night) -->
TACH (day) -->
TACH (night) -->
SPEEDO (day) -->
SPEEDO (night) -->
Like what they said above, the logo for the tach has problems (i'm thinking of just going with "KatRiders.com") i cant think of anything else to put there, so if you got ideas, speak up and we can all decide on it. Question:
should we just put the kanji/GSXF on the tach for both 600 and 750? and the KatRiders.com on the gas?
--> Pls. go to the last page to see Updated List and how many more we need. Thanks
OK Fellas we can finally get Illumiglow Gauges (after feeling so left out ) well after tons of countless e-mails to StreetRacerParts and not getting any reply, FUNK Them If they dont want my $$$, I sure dont want to give it to them either! Ok I'll stop my biatchin' and get to the good stuff.
Heres what I got from them -
Hi,
We can add both fuel gauges with each kit. We looked at your logos and found that the KatRiders logo will not show the figure on the bike very well. It is too small to show well. It would show up better to remove the figure on the bike and do text only. Or you could do the KR in the circle as the only text.
The color would be black for the entire logo (depending on color). And yes the logos can be added on the fuel logo instead of speedo (or also on speedo).
Please read our Group buy info below.
Thanks,
Speedhut.com
If you are interested in becoming a Group Leader for your cluster, please read the info below:
*The Group Leader sends a cluster to begin the Pre Order. Please don't use a personal vehicle's cluster (we don't send clusters back). We recommend a cluster from a junkyard (it does NOT have to be in working condition. HOWEVER it DOES need to have everything intact - i.e., needles, cover etc).
Please send the Cluster via Ground (inexpensive) Mail (or another inexpensive method). Please make sure it is INSURED for your protection! *Remember to add your contact information in the package.
Once the cluster has been received the Pre Order will be added to our Model Development Program with the sender listed as the Group Leader. The Group Leader's email will be listed on the site for questions. We will be in contact with the Group Leader throughout the process.
Once we receive 25 Pre Orders we will begin tooling. The Group leader will get their EL-Glo Dial kit for FREE (+ S&H). We offer incentive discounts for the entire Group. *Free Text, Free Standard Graphics, Free Standard Logo's. Custom Logos are $25.00 each. If the majority of the group wants a particular logo it can be included in the group buy at no cost.
*We can add the Km/h version at No additional cost!
The price for our Custom Gauge Kit's are generally around $99.95 + $8.00 US S&H per Pre Order. The price for our Custom HVAC Kit's are $35.95 + $8.00 US S&H.
Thank you for your interest and please email us if there are any further questions.
Thanks,
Speedhut.com team
--------------------------------------------------------------------------------
From: S E Q X 3 4 [mailto:[email protected]]
Sent: Tuesday, March 07, 2006 12:24 PM
To: sales
Subject: RE: custom gauge
HELLO.
Thank you for responding to my mail. The gauges are for a Suzuki Katana (motorcycle). 88-97 Suzuki GSX 600F to be more specific. I had already started a "Group Buy" at an online forum that i am a member at. Its a forum for people with the same bike model (GSXF).
We have over 2,000 members and most are waiting to hear from me for the price and more info. I have some questions about the gauges,
1. the Katana came in two sizes (600cc and 750cc) the picture i sent you before was from a 600, the 750 had a smaller fuel gauge (same size speedo and tach). My question is
a. will you be able to make the 750 fuel gauge too? (i am sure one of the members will be happy to provide you the face plate for it)
b. is it possible to get both fuel gauge (600&750) in the package?(so they can just plug in the correct size gauge whatever size they need)
I went to your web site and used your generic design template, and want to know if instead of the graphics on the speedo, i would like it on the fuel gauge. here is a picture of how i would like it to look
Gas - http://img125.imageshack.us/img125/3131/gas31zn.jpg
Tach - http://img125.imageshack.us/img125/3416/tach25so.jpg
REVERSE White Dial w/ Dark Blue Eurostyle Font
We can add both fuel gauges with each kit. We looked at your logos and found that the KatRiders logo will not show the figure on the bike very well. It is too small to show well. It would show up better to remove the figure on the bike and do text only. Or you could do the KR in the circle as the only text.
The color would be black for the entire logo (depending on color). And yes the logos can be added on the fuel logo instead of speedo (or also on speedo).
Please read our Group buy info below.
Thanks,
Speedhut.com
If you are interested in becoming a Group Leader for your cluster, please read the info below:
*The Group Leader sends a cluster to begin the Pre Order. Please don't use a personal vehicle's cluster (we don't send clusters back). We recommend a cluster from a junkyard (it does NOT have to be in working condition. HOWEVER it DOES need to have everything intact - i.e., needles, cover etc).
Please send the Cluster via Ground (inexpensive) Mail (or another inexpensive method). Please make sure it is INSURED for your protection! *Remember to add your contact information in the package.
Once the cluster has been received the Pre Order will be added to our Model Development Program with the sender listed as the Group Leader. The Group Leader's email will be listed on the site for questions. We will be in contact with the Group Leader throughout the process.
Once we receive 25 Pre Orders we will begin tooling. The Group leader will get their EL-Glo Dial kit for FREE (+ S&H). We offer incentive discounts for the entire Group. *Free Text, Free Standard Graphics, Free Standard Logo's. Custom Logos are $25.00 each. If the majority of the group wants a particular logo it can be included in the group buy at no cost.
*We can add the Km/h version at No additional cost!
The price for our Custom Gauge Kit's are generally around $99.95 + $8.00 US S&H per Pre Order. The price for our Custom HVAC Kit's are $35.95 + $8.00 US S&H.
Thank you for your interest and please email us if there are any further questions.
Thanks,
Speedhut.com team
--------------------------------------------------------------------------------
From: S E Q X 3 4 [mailto:[email protected]]
Sent: Tuesday, March 07, 2006 12:24 PM
To: sales
Subject: RE: custom gauge
HELLO.
Thank you for responding to my mail. The gauges are for a Suzuki Katana (motorcycle). 88-97 Suzuki GSX 600F to be more specific. I had already started a "Group Buy" at an online forum that i am a member at. Its a forum for people with the same bike model (GSXF).
We have over 2,000 members and most are waiting to hear from me for the price and more info. I have some questions about the gauges,
1. the Katana came in two sizes (600cc and 750cc) the picture i sent you before was from a 600, the 750 had a smaller fuel gauge (same size speedo and tach). My question is
a. will you be able to make the 750 fuel gauge too? (i am sure one of the members will be happy to provide you the face plate for it)
b. is it possible to get both fuel gauge (600&750) in the package?(so they can just plug in the correct size gauge whatever size they need)
I went to your web site and used your generic design template, and want to know if instead of the graphics on the speedo, i would like it on the fuel gauge. here is a picture of how i would like it to look
Gas - http://img125.imageshack.us/img125/3131/gas31zn.jpg
Tach - http://img125.imageshack.us/img125/3416/tach25so.jpg
REVERSE White Dial w/ Dark Blue Eurostyle Font
GAS (day) -->
Gas (night) -->
TACH (day) -->
TACH (night) -->
SPEEDO (day) -->
SPEEDO (night) -->
Like what they said above, the logo for the tach has problems (i'm thinking of just going with "KatRiders.com") i cant think of anything else to put there, so if you got ideas, speak up and we can all decide on it. Question:
should we just put the kanji/GSXF on the tach for both 600 and 750? and the KatRiders.com on the gas?
Comment