The Kat is back
A little back story, I bought the Kat 3 yrs ago, picked up a parts bike 2003 750 Kat that I pulled apart and sent out the parts for powdercoating Winter of 2013-2014. Put those parts on for summer 2014. Got everything back together then life took over and I only got to ride her for 300 miles the whole season. So this Winter 2014- 2015 ripped into her again
Sent carbs to Arsenic, Thanks Chris for a spectacular job and sent rear shock to Norwest Thanks Terry, handles great.
Here's the list of mods
Front lower forks powder coated
Home made inspection sticker bracket
Front suspension Springs from Racetech with Gold Valve Cartridge Emulators
6 piston front brakes and master cylinder mounted with SV brackets
Ebay brake fluid reservoir modified and redesigned to attach to custom handle bar mount
G and J aircraft braided front and rear brake lines
Black Front rim from the donor bike
Headlight assembly from the donor bike since the lens is tinted
BMW 3 series projectors with HID bulbs installed using stock hi/lo switch with time delay relay Thanks Uno and Sporty Drew
Coil Mod
Mesh mod
Factory Original gas tank Bra
Rebuilt carbs with Ivan jet kit Thanks Arsenic
Rear shock rebuilt and resprung by TMOD at Norwest
Shock cushion and dog bones powder coated
New front and rear sprocket
New chain
Black Rear rim from donor bike
Yoshi Exhaust Can thanks to Craigslist
Home made side mounted license plate relocation bracket with 4 Black bullet led mounting bolts
Rear fairing off 2003 Kat with Krazy Kreations undertail
Powder coated rear grab bar
Stock dash mounted clock from donor bike
Black swingarm from donor bike with new bearings installed
All rubber mounting bushings and fairing bolts replaced with New rubbers and Black aluminum bolts
Separator plate between shock lower legs powder coated
Bandit chain adjuster powder coated and installed Thanks Kreylyn and Arsenic for the inspiration
I think that's it..
At least for now
A little back story, I bought the Kat 3 yrs ago, picked up a parts bike 2003 750 Kat that I pulled apart and sent out the parts for powdercoating Winter of 2013-2014. Put those parts on for summer 2014. Got everything back together then life took over and I only got to ride her for 300 miles the whole season. So this Winter 2014- 2015 ripped into her again
Sent carbs to Arsenic, Thanks Chris for a spectacular job and sent rear shock to Norwest Thanks Terry, handles great.
Here's the list of mods
Front lower forks powder coated
Home made inspection sticker bracket
Front suspension Springs from Racetech with Gold Valve Cartridge Emulators
6 piston front brakes and master cylinder mounted with SV brackets
Ebay brake fluid reservoir modified and redesigned to attach to custom handle bar mount
G and J aircraft braided front and rear brake lines
Black Front rim from the donor bike
Headlight assembly from the donor bike since the lens is tinted
BMW 3 series projectors with HID bulbs installed using stock hi/lo switch with time delay relay Thanks Uno and Sporty Drew
Coil Mod
Mesh mod
Factory Original gas tank Bra
Rebuilt carbs with Ivan jet kit Thanks Arsenic
Rear shock rebuilt and resprung by TMOD at Norwest
Shock cushion and dog bones powder coated
New front and rear sprocket
New chain
Black Rear rim from donor bike
Yoshi Exhaust Can thanks to Craigslist
Home made side mounted license plate relocation bracket with 4 Black bullet led mounting bolts
Rear fairing off 2003 Kat with Krazy Kreations undertail
Powder coated rear grab bar
Stock dash mounted clock from donor bike
Black swingarm from donor bike with new bearings installed
All rubber mounting bushings and fairing bolts replaced with New rubbers and Black aluminum bolts
Separator plate between shock lower legs powder coated
Bandit chain adjuster powder coated and installed Thanks Kreylyn and Arsenic for the inspiration
I think that's it..
At least for now
Comment