So with $8 at home depot I bought screws, nuts, washers and 6 L brakets all the same size.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
It looks like part of the descriptions were cut off, but you can see the braket I used from the old license plate holder. I bent the braket at 90 degrees on both sides to mount the signal lights.
You'll need to drill larger holes for this and make sure you measure the bends your going to make so that it brings the signal lights nice and tight around the license plate but still leavesa bit of space. I used the desk vice at home depot for the 90 degree angles.
Comment
-
Originally posted by KatanaSoldierVery clean!
i haven't gathered the time (or courage) to perform this mod yet.
the way you kept the stock signals and tightened everything up looks real sharp. i will refer to this thread when the time comes. thanks for posting and good job!One who is a Samurai must before all things keep constantly in mind, by day and by night... the fact that he has to die." -- The Code of the Samurai
Comment
-
Originally posted by NuzziI sent you the email for the pics... the L brakets are an inch long and 1/2 inch wide. I used 2 per reflector and 2 for the plate. Let me know how it goes...
Nuzzi
I'm having trouble with some of the posts on KR and I can't view the pix. Would you be so kind as to email the pix to me as well. Thanks in advance.
addy is sslawrenceatsympatico.ca (replace at with @ as before)
By the sounds of the responses you've received, I'm guessing your mod looks good. I'm looking forward to seeing it.
Spud
Comment
Comment