Replacement turnsignals

[caboroig]

Hi
Can anyone supply web sites addresses for replacement front turnsignals that are a bit more flush to the fairing. Also rears.

Thanks for your help

[brooder]

There aren't any. Anything that you put on there will require modification on your part. All the aftermarket signals have the same shape as the stock.

[Black_peter]

Fronts on the 98+ yes..
But rears are bolt on..

[Suzuki 600 AT]

rear turn signals

I just trimmed my tail and added new turn sign. I picked them up off ebay for 10 bucks. I had to cut and splice the wires, but no big deal. Wire nuts and a little elec. tape and whala! I'll post pictures tomorrow.

[caboroig]

I just trimmed my tail and added new turn sign. I picked them up off ebay for 10 bucks. I had to cut and splice the wires, but no big deal. Wire nuts and a little elec. tape and whala! I'll post pictures tomorrow.

Thanks for allyour help folks
'58cycleparts&accessories have a nice range back and front
Look forward to seeing your pics

[caboroig]

I just trimmed my tail and added new turn sign. I picked them up off ebay for 10 bucks. I had to cut and splice the wires, but no big deal. Wire nuts and a little elec. tape and whala! I'll post pictures tomorrow.

Thanks for allyour help folks
'58cycleparts&accessories have a nice range back and front
Look forward to seeing your pics

[Black_peter]

I got good service from 58cycle..

[Suzuki 600 AT]

turn signal pics.

Sorry about the delay. Too busy modifying the wife's bike! Here's several pics. I bought the turn signals off ebay for 10 bucks with about 6 bucks s+h. They have a variety also. Here's a link to the store.

http://stores.ebay.com/forwardmotionmc

[caboroig]

Thanks very much for your help
Caboroig