I was wanting to move my license plate due to chopping off the back fender piece. Can it be placed on the lower swingarm without a bracket, or is there a place where i can purchase a bracket. Also what flush mount turn signals should i use .
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
I don't know about the swing arm, a guy at my work has a gsxr he did that to and he covers it up when he goes through ez pass. But there are a lot of things to do for the bracket, do a search here. I recently replaced my bracket that broke with croner braces for 3 bucks @ homedepot.
Rear signals?? they make integrated ones with the tail light.
2005 600, Chopped Shovel, Smoked Turn Signals and Rear Light, 14/50 Sprocket Change, Lubetronic, Whiteface Gauges, Chrome Reflective Screen, Anodized Bar ends and Levers, Met. z3's and some nuts and bolts!!
-
I just used 2 L brakets and mounted under the tale where there was to open holes, the brackets are spread out a bit but it looks decent. i also mounted the brackets so that i could keep the licence plate lightin its original spot"No regrets, that's my motto. Well... that and everyone Wang Chung tonight." -Out Cold 2001
Comment
-
Originally posted by tzortnThis is a nice option:
http://www.katriders.com/forums/view...ghlight=#48300
That's the one i had and it broke because of the weight of the turn sig.2005 600, Chopped Shovel, Smoked Turn Signals and Rear Light, 14/50 Sprocket Change, Lubetronic, Whiteface Gauges, Chrome Reflective Screen, Anodized Bar ends and Levers, Met. z3's and some nuts and bolts!!
Comment
-
Originally posted by Jhonyquest97Originally posted by tzortnThis is a nice option:
http://www.katriders.com/forums/view...ghlight=#48300
That's the one i had and it broke because of the weight of the turn sig.
Comment
-
ooops. just put mine on the swing arm during my lunch break(got bored). if its unsafe then i can put it back, BUT it looks a lil better now. All I need is some good stick-on, easy to install, flushmount turn signal. pics here.Attached Files:::''''lll;'';
Comment
-
-
my tail now looks like this... need some advice on what step to do next. new to all this mod'n stuff but brave enuf to try anything.Attached Files:::''''lll;'';
Comment
-
Originally posted by goose491Originally posted by AHFPlease don't put it on the swingarm!
Comment
-
Originally posted by shefkat2000Originally posted by AHFOriginally posted by goose491Originally posted by AHFPlease don't put it on the swingarm!
Comment
Comment