I want to replace the factory bar ends on my 2003 kat I was going to just get new screws and paint the old ones but cant seem to find screws that match tried several places including home depot and Canadian tire. I found these on line it says the do fit but I know we just use a screw the screws into the end of the handle bar. Anyone have any experience with these ones
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
You'll have to mod the bars as the katana has a screw plate in the bar. You may just be able to pull it out or drive it deeper into the bar, I can't remember if it's a welded plate or the grip type. I would reuse the katana end they are heavier and work better to reduce vibration."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
-
m6 X 1 tapered head... the length is specific to your application.
Bar ends are to reduce vibration at the bars from engine and road vibration.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
I got the same problem. My Bar ends are rusting and the screws holding them on are seized. I was going to purchase new bar ends until I read this post. I guess I'll refinish mine while on the bike. Riding season starts here in just a couple of weeks and have other stuff on my list before riding it as my daily.
Good post
Comment
-
Originally posted by 92xjunker View PostYou'll have to mod the bars as the katana has a screw plate in the bar. You may just be able to pull it out or drive it deeper into the bar, I can't remember if it's a welded plate or the grip type. I would reuse the katana end they are heavier and work better to reduce vibration.
Comment
Comment