Would these Mirrors Work?

[CSHughes]

Would these mirrors work on a 96' Katana 600? I don't know if the bolt holes would be the same or the same spacing.

Click Here....Ebay Mirrors

It would be a cool way to integrate the turn signals in the front.

[jersezhustla]

I have those same mirrors on my 98' kat. They should work b/c I used the bolts from my factory mirrors and bolted them puppies right in.

[csjcsj]

Will they work on a 2006???

[WickedKatweazle]

If it fits one post katana it will fit all.

[Freebird01]

i got a set on my 1100 but the brackets don't fit the 1100 and the pre 600's very well so i made my own.

[CSHughes]

i got a set on my 1100 but the brackets don't fit the 1100 and the pre 600's very well so i made my own.

Do you have a picture of your bracket set-up so i can see what i'm up against if i buy these?

[Chilli99katana]

I have those on my bike... just have to figure out how to get the wire down. I drilled a hole down next to the bolt holes.

[Idrivetoys]

should, and they look good

[MrBrant]

The mounting bracket doesn't aim the mirrors anywhere close to correctly on the pre kat. (which your '96 is)

I made some spacers, and did a single-bolt to hold them in place for mine, but it looks like crap, and they don't work well.
I'll be going back to the stock "donkey ears".

[Freebird01]

go look in the 1100 only section. there is a post in there about mirrors with pics