[Tjums]

I think that you are right…

I talked to the guy that makes them – and he can make them without the numberplate holder…

[mreedohio]

sweet, cause i want one without the numberplate holder because i have my tag located on my swingarm and not underneath my tail light.

[ThAzKat]

sweet, cause i want one without the numberplate holder because i have my tag located on my swingarm and not underneath my tail light.

You are always wanting something

I can tell you that the tails on the 750 measure almost 12 inches at the back of the kick plates.

[mreedohio]

well it looks like you have atleast 3 orders that would be as soon as they are available. me(without numberplate holder) blazerzr2 and thazkat (uncut and i think they want them like 2 inches longer as well for their 750 tails). we all live close to each other so shipping shouldn't be a problem shipping them in one box to one of us. oh i had a question, do you think there will be any problems running a rear hugger with the undertray?

[Tjums]

Hey guys.
I’m glad that you like the design…
I have talked to the guy that makes them. (it is not me) – he will make them for you, but he have to find out about the shipment to US.
Just to clear it all up – are you interested in one big plate that you cut out yourself, or do you want him to cut it out ?
About the hugger – I HOPE SO …. LOL (I want a hugger also) But I simply don’t know. It looks like there is room for it on mine, but I have installed the bandit 1200 rear suspension.

I will try to get some sort of price on the stuff for you

/Thomas

[Anoucka]

I found this picture, dad's old Kat with hugger and undertail.

[Tjums]

The price...

Anoucka -> looks great – good picture off the hugger. The bobble is somewhat deeper though…

[mreedohio]

Hey guys.
I’m glad that you like the design…
I have talked to the guy that makes them. (it is not me) – he will make them for you, but he have to find out about the shipment to US.
Just to clear it all up – are you interested in one big plate that you cut out yourself, or do you want him to cut it out ?
About the hugger – I HOPE SO …. LOL (I want a hugger also) But I simply don’t know. It looks like there is room for it on mine, but I have installed the bandit 1200 rear suspension.

I will try to get some sort of price on the stuff for you

/Thomas

Anoucka -> looks great – good picture off the hugger. The bobble is somewhat deeper though…
Just got the price.

i want mine already cut to fit a 600 but if he could without the numberplate holder. i have hayabusa rear shock so i'm sure there would be enough room.

[Tjums]

The shipment is something like 60 $ (I think) – I have checked the price of the Danish postal services – international… with UPS it was something like 345$

[mreedohio]

thats sounds like a great price to me, with 3 of us splitting shipping costs that shouldn't be a problem

[Tjums]

Great – I will set it up whit the guy that is going to fabricate them.

I need to have mine done before we send them, because yours is going to be a copy off mine.
My suggestion is that he makes it a little larger (not much – just a bit) so you can sand it down to shape. Mine is a prototype, and it will a bit awful if you get it all the way to the states, just to find out that it is 2 mm to short or not wide enough.
I still need some Info on the ones to the 750’s – Is it one big plate, or does it need do be cut into some kind of shape… Remember that you can use the 600 as a template

[mreedohio]

so can he do the 600 without the numberplate holder?

[Blazerzr2]

dimensions

Great – I will set it up whit the guy that is going to fabricate them.

I need to have mine done before we send them, because yours is going to be a copy off mine.
My suggestion is that he makes it a little larger (not much – just a bit) so you can sand it down to shape. Mine is a prototype, and it will a bit awful if you get it all the way to the states, just to find out that it is 2 mm to short or not wide enough.
I still need some Info on the ones to the 750’s – Is it one big plate, or does it need do be cut into some kind of shape… Remember that you can use the 600 as a template

i may have missed this, but what is it made of? abs? and if you can send me the dimensions of the uncut, i can tell you if it will fit my 750

[Tjums]

Mreedohio - That was not a problem, he actual rather want to make without because it is easier – or so he says.

Blazerzr2 – I have to get back to you on what it’s made off – I would just say plastic – But I will find out. The uncut will be one big plate (as shown on one of the pictures) – I will find the dimensions for you (I’m at work right now)

[mreedohio]

Mreedohio - That was not a problem, he actual rather want to make without because it is easier – or so he says.

Blazerzr2 – I have to get back to you on what it’s made off – I would just say plastic – But I will find out. The uncut will be one big plate (as shown on one of the pictures) – I will find the dimensions for you (I’m at work right now)

awesome, just let me know when your ready so i can send some $$$