hey guys running what i thought was a 50 / 15 combo on a 93 750 and at 70 its doing like 6k revs seems a bit high but i am comparing against my bandit 12 when i went plus 3 ,any one else running same combo if so what revs you at
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
I like to use http://gearingcommander.com/ to give me an idea what sprocket combos will change94 GSX600F, V&H 4-1 Supersport exhaust
My daily driver build thread- http://katriders.com/vb/showthread.php?t=129561
Comment
-
I can't provide a point of comparison, but a cheap thing to fix/replace if you think your RPM's are too high is the clutch springs.
A full set should only run $40 or so, and on most bikes you can avoid draining the oil so long as the bike is on the side stand. Just be sure to have a new gasket on hand before you start the job.
That's good maintenance on mid-to-high mileage bikes even if its doesn't solve your RPM issue.-Chris
**if what I said can be taken two ways, and one of them offends you, I meant it the other way.
Comment
Comment