So I did the bandit chain adjuster setup and it doesn't seem to be able to pull the chain far enough. I took the inner parts of the Kat and welded on the nut from the bandit and use the outside part from the bandit. Since I used the inner parts from the Kat I should be able to pull just as far back but thats not the case. Any ideas?
EDIT:could this be a result of a really old loose chain?
I'm gonna replace the chain and sprockets soon so it should be fine but I've got it as tight as it will go with 1 1/4" slack(I usually would go to 1"). When I replace stuff I'm gonna look and see if there is a problem I just thought maybe someones seem this problem before...
Another thing is if you have tight spots in yer chain how do you fix that? it's not a lot but still...
EDIT:could this be a result of a really old loose chain?
I'm gonna replace the chain and sprockets soon so it should be fine but I've got it as tight as it will go with 1 1/4" slack(I usually would go to 1"). When I replace stuff I'm gonna look and see if there is a problem I just thought maybe someones seem this problem before...
Another thing is if you have tight spots in yer chain how do you fix that? it's not a lot but still...
Comment