Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

Front wheel and rotors removal

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Front wheel and rotors removal

    Is there anything I need to know before I go to pull the front rim off the the pre kat. Are there any suprises in there. Whats the procidure.
    92 Kat 750 rebuild from dead 108 days and counting till i get my license BACK
    01 mercury cougar
    00 cougar black
    sigpic

  • #2
    Remove the calipers first.
    Make sure you have spare hardware set up in case you strip a rotor screw.
    Watch out for the spacer make a note of how it's positioned.
    When you put the rim back on make sure the speedo pick up is right. Tipped to far one way it can over stress the cable and break it.

    Comment


    • #3
      Have some safety wire or coat hanger handy for hanging the calipers from the frame. (So they're not hanging from the hoses.) I always forget that and have to put a bolt back in while I go digging for some wire.
      Wherever you go... There you are!

      17 Inch Wheel Conversion
      HID Projector Retrofit

      Comment


      • #4
        IIRC, you will have to spread the calipers a little bit to get them off the rim because of the bleeder on the inside of the caliper.
        Pics
        Pics
        No pics yet
        Just because they sound the same doesn't mean they are: there≠their≠they're; to≠too≠two; its≠it's; your≠you're; know≠no; brake≠break

        Comment

        Working...
        X