Tweet
Hey there im looking for some 'economy' fron disk rotors for my 89 gsx750-f do they have to be model specific disks or will others fit?
-
-
Originally posted by Danhutch View Post
The only other bike I know shares the same rotor is the GS500f bikes. They have 1 though, not 2.
What part of the world are you located?
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!" -
I'm Based in the uk, as far as i can read they are just standard 290mm floating disksComment
-
Originally posted by Danhutch View Post
Yes, with specific offset, bolt pattern, and center hole size. Specifics posted at the bottom. As mentioned, the only other model OEM bike that I've seen that sports the specific model rotor is the gs500f.
There are after market options... but most front disks are not going to be very cheap.
Outside Diameter 290
Inside Diameter 64
Bolt Hole Circumference 86
Bolt Hole Quantity 5
Bolt Hole Size 10.5
Thickness 4.5
Minimum Thickness 4.0
Offset 19.5
Type of Bolt Holes STRAIGHT
KreyLast edited by Kreylyn; 05-15-2014, 01:32 PM.93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"Comment
-
Don't cheap on discs, it could be the difference between life or....http://www.7thgeardesigns.com
http://www.lunchtimecigar.com
'90 Suzuki 750 Kat
"Shut up and drink your gin" - Fagin (Oliver Twist)
"But, as is the usual scenario with a Harley it was off-line when it crashed," Schwantz added dryly.
"You didn't hear what I meant to say" - my Son
Comment
Comment