83 GS1100 front end swap & rear wheel

[jamieXD]

Hey guys quick question.

Would a pre kat 600 front end bolt onto a gs1100e frame?

Did a quick google search and found out the stem bearings are the same size but I just wanted to confirm that will y'all.

Also will the pre kat 600 rear wheel, sprocket, and brake set up fit?

Thanks in advance!

[GSXFJim]

I'd check the stem lengths first.. the kat could be shorter than the GS or vice-versa. for the rear, check the axle size, you also may need spacers made to center the wheel, this also may have an effect on the chain line from the c/s sprocket to the rear sprocket.

I'd hit the GS forum and ask these questions, I'm sure its been well covered.

[jamieXD]

I'd check the stem lengths first.. the kat could be shorter than the GS or vice-versa. for the rear, check the axle size, you also may need spacers made to center the wheel, this also may have an effect on the chain line from the c/s sprocket to the rear sprocket.

I'd hit the GS forum and ask these questions, I'm sure its been well covered.

Cool! Thanks for the info