have a 2000 gsx600, already rebuilt the two front calipers and bled them properly.
now on to the back brake! however i've ran into a small hiccup. the little pins that hold the brake pads in the caliper wont budge...
i've let the pins "soak" in PB blaster for about a couple hours and still no movement. in an effort to try and move them, i've clamped some small vice grips on the pins and tapped the grips with a hammer hoping the jolts would break it loose. no luck
heres a couple pics of the pins i'm talking about in case theres any confusion
(sorry for the blue-ish haze on the pics... my camera/phone jumped outa my pocket at 65mph... im just glad it still works )
now on to the back brake! however i've ran into a small hiccup. the little pins that hold the brake pads in the caliper wont budge...
i've let the pins "soak" in PB blaster for about a couple hours and still no movement. in an effort to try and move them, i've clamped some small vice grips on the pins and tapped the grips with a hammer hoping the jolts would break it loose. no luck
heres a couple pics of the pins i'm talking about in case theres any confusion
(sorry for the blue-ish haze on the pics... my camera/phone jumped outa my pocket at 65mph... im just glad it still works )
Comment