Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

Rebound Damping

Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Rebound Damping

    Question about setting the damper

    I was reading the manual and not sure how to configure it

    on the bike i bought the 2 damper screws set to same position but one is higher our of than the other one.

    but can't find anything which says how to adjust properly.
    Tags: None
  • #2
    What bike you got? Year?
    Chris

    Originally posted by jetmerritt
    Save up for great gear and dress for the fall before you ride. If you can't afford good quality gear, don't ride. It's like saying you can't afford seat belts for your car. There are just no laws to make gear mandatory.

    Comment

    • #3
      Sorry I forgot too put it.

      It's a 2002 Katana gsx600f

      Comment

      • #4
        The screw adjusters themseves do not raise or fall when adjusting them. They don't move like preload adjusters.

        Why one is higher than the other is a mystery to me.
        How To Install Race Tech Emulators & Rebuild Forks
        How To Repack Yoshimura RS3 Exhaust
        How To Install Oil Cooler Fans
        How To Install Audiovox Cruise Control On A 1998+ Katana

        Comment

        • #5
          The rods and the screw just slip into the fork cap with a o-ring on it so it will have some slop. The adjuster is just a 4 detent so you cannot go wrong all the way counterclockwise and you are at 1.

          Tmod

          Comment

          Previous template Next
          Working...
          X