Just a note for anyone thinking about putting the EBC HH (or other EBC) pads on the rear of the Kats:
REMOVE THE FACTORY REAR BRAKE PAD SHIMS BEFORE INSTALLING EBC REAR PADS
Installed a set before the rally, and they never seated right. After talking with EBC's race tech support, they agreed that the pads should not be installed with the factory rear brake shims (see Item #11 at RonAyers.com/fiche/300_0298/rear_caliper/rear_caliper.cfm). They will be looking into packaging that info in with the rear pads from now on (as either a sticker or as a sheet of paper) to keep others from running into the same issues.
Side note: they were nice enough to send new pads. Still waiting for the rear rotor they promised to send as a make-up present...
Cheers
=-= The CyberPoet
REMOVE THE FACTORY REAR BRAKE PAD SHIMS BEFORE INSTALLING EBC REAR PADS
Installed a set before the rally, and they never seated right. After talking with EBC's race tech support, they agreed that the pads should not be installed with the factory rear brake shims (see Item #11 at RonAyers.com/fiche/300_0298/rear_caliper/rear_caliper.cfm). They will be looking into packaging that info in with the rear pads from now on (as either a sticker or as a sheet of paper) to keep others from running into the same issues.
Side note: they were nice enough to send new pads. Still waiting for the rear rotor they promised to send as a make-up present...
Cheers
=-= The CyberPoet
Comment