Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Check out this thread here where I re-used the license plate bracket on the shovel. I did build my own other mount for the plates and the signals, but it should give you some ideas.
Looking for the best exhaust for your Kat or need help with the installation ?
From the Mesh Mod to the Fender Eliminator, installing new signals, Braada Cowls,
Frame sliders or Undertails; Show us all of your custom mods and share your tips here.
Originally posted by numus View Post
-
Originally posted by 05RedKat600 View PostCheck out this thread here where I re-used the license plate bracket on the shovel. I did build my own other mount for the plates and the signals, but it should give you some ideas.
Looking for the best exhaust for your Kat or need help with the installation ?
From the Mesh Mod to the Fender Eliminator, installing new signals, Braada Cowls,
Frame sliders or Undertails; Show us all of your custom mods and share your tips here.
If you use that light, you will have to get an electronic flasher, otherwise the signals will flash too fast.
FENDER ELIMINATOR BRACKET ONLY. Also a lot of countries do not scan the bar codes either. Chicago is the airport. So I am not worried about it. It's not possible. I put this here so you know beforehand.
Wondering If i can get away with something like this and mount it to the original bracket.
Any recommendations on an electronic flasher replacement that is plug and play? Or should i just follow http://katriders.com/vb/showthread.php?t=101616 for a DIY method
Guessing G215-EB: Universal Motorcycle/Scooter Flasher Is all i need? http://www.superbrightleds.com/cgi-b...2Fflashers.htmLast edited by numus; 03-03-2012, 06:36 PM.
Comment
-
Originally posted by numus View PostLooks like that is the general idea i am going for with the fender chop... Just really worried about messing up the cut (not making it flush and smooth looking) but guess that is just part of it... Can't fabricate my own license plate mount but trying to find one already made online.
FENDER ELIMINATOR BRACKET ONLY. Also a lot of countries do not scan the bar codes either. Chicago is the airport. So I am not worried about it. It's not possible. I put this here so you know beforehand.
Wondering If i can get away with something like this and mount it to the original bracket.
Any recommendations on an electronic flasher replacement that is plug and play? Or should i just follow http://katriders.com/vb/showthread.php?t=101616 for a DIY method
Guessing G215-EB: Universal Motorcycle/Scooter Flasher Is all i need? http://www.superbrightleds.com/cgi-b...2Fflashers.htm
Check out this thread for a home made bracket that anyone can make. Readily available from a Home Depot, Lowes, or Ace hardware store. Piece of cake! And, you can always drill holes for it to mount to the license plate bracket mount like I used. http://katriders.com/vb/showthread.php?t=113713
Sorry, not much help as to which flasher to use. Never done the conversion myself. If it were me, I'd follow that DIY thread as it's known to work 100%.
Comment
Comment