So all the odds and ends are done on the bike so it's time to really start tearing into her.
So far I've got a Vance and Hines slip on installed and a fp stage one jet kit, new chain and factory sprokets, some Modified led turn signals and I've replaced the battery and "most" of the mess of wire the p/o fixed on the bike. She was a totalled out bike and she's street legal again starting tomorrow. ( tho she's already been my daily)
It's winter time and parts are on the way.
88 gsxr can
5 degree timing advancer
Machine work gets done hopefully in 2 week right now I'm having the heads checked out and they'll be milled flat considering a getting them decked but I may be boring it to an 816 so I've got some math to do first, port work will be done by me before the heads sent to the machine shop
There's much more I plan to do and I'll keep y'all updated on my progress. Here a pic of thumper in her current state https://www.instagram.com/p/-iZMDVSoiL/
Parts that are here
Still needed
Bikes is getting an 89 gsxr Intake and exhaust cam, a new throttle cable, new clutch actuator screw, pod filters, Carb rebuild and a dyno tune with before and after dyno sheets.
Done
So far I've got a Vance and Hines slip on installed and a fp stage one jet kit, new chain and factory sprokets, some Modified led turn signals and I've replaced the battery and "most" of the mess of wire the p/o fixed on the bike. She was a totalled out bike and she's street legal again starting tomorrow. ( tho she's already been my daily)
It's winter time and parts are on the way.
88 gsxr can
5 degree timing advancer
Machine work gets done hopefully in 2 week right now I'm having the heads checked out and they'll be milled flat considering a getting them decked but I may be boring it to an 816 so I've got some math to do first, port work will be done by me before the heads sent to the machine shop
There's much more I plan to do and I'll keep y'all updated on my progress. Here a pic of thumper in her current state https://www.instagram.com/p/-iZMDVSoiL/
Parts that are here
- new set of dremmel tips for the port work+a bottle of machinist blue ( bought )
Still needed
- 816 bore kit
- new fairings or fiber glass supplies ( this was finished, then i had my first drop, shes re painted but i really want to go through a do all new plastics eventually)
- Paint ( again)
- 5 degree advancer( may be doing the poor mans advancer instead)
- new brake pads ( taking suggestions )
- Nitrous- mostly just for the haters wont be a big spray and only for the drag strip. If I can find a used kit in decent shape
Bikes is getting an 89 gsxr Intake and exhaust cam, a new throttle cable, new clutch actuator screw, pod filters, Carb rebuild and a dyno tune with before and after dyno sheets.
Done
- 88-89 gsxr intake cam / and exhuast cam
- ape adjustable cam sprocket set
- 98+ header
- Vance and Hines slip-on
- Unknown Jet kit ( think its a factory pro kit)
- Pod filters
- Gen maintenance
Comment