View Single Post
Old 06-21-2017, 07:26 PM   #8
Kat King
Supporting Member
Kreylyn's Avatar
Join Date: Nov 2008
Location: Weaverville, NC
Posts: 15,650
eBay ID: Kreylyn


Originally Posted by Blackbandit View Post
Okay I have trouble explaining things sometimes so here's how it is...... the engine will crank over with the kill switch on and when I turn the kill switch off it does not allow it to crank, so it seems to be working properly . What would be the best way to test the kill switch? I honestly don't think it has to do with my kill switch but I have been wrong more than once lol

I just tested brand new working coils from a Buddies bike and no spark. I checked all my ground wires they seem okay my pickup coil is reading 170 ohms which is in spec my voltage Peak test for the signal generator is measuring two volts which is in Spec with the Haynes manual
What voltage do you have at the coils when the starter is turning the motor over?

93 750 Kat

Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread

"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Kreylyn is offline   Reply With Quote