KatRiders.com

KatRiders.com (https://katriders.com/vb/index.php)
-   Suzuki Katana Talk (https://katriders.com/vb/forumdisplay.php?f=131)
-   -   New anti-theft method (https://katriders.com/vb/showthread.php?t=76074)

hougy 11-30-2007 10:50 PM

New anti-theft method
 
Take a look at http://www.youtube.com/watch?v=S0bhZtc3mlA

See his anti-theft device? he talks about it throughout the movie and tells how it works.

I'm really going to look into doing this. I looked at the Kat and it has a good chunk of wire coming from the key ignition, so it'd hook up easily. Anyone have any thoughts on it?

KatanaSoldier 11-30-2007 11:17 PM

Interesting. He should get a patent on that and develop a cleaner version.

hougy 11-30-2007 11:29 PM

I was thinking I could just get 4 adapters, 2 female and 2 male. Cut the wire twice and place a M-F connections on both ends like he did, and add a locking device so it wont come off if something pulls on it.

Hmmmm

/me plans to go to NAPA and Radio shack

Astro4x4 12-01-2007 12:14 AM

These would be my choice.
http://www.agri-tronix.com/html/weat...onnectors.html

hougy 12-01-2007 03:54 AM

That could work, any idea what wire guage the key ignition has?

moto_psycho 12-01-2007 06:23 AM

the gix ignitions are exactly the same as that.... which is even easier to hot wire

Black_peter 12-01-2007 09:27 AM

That's old school.. A multi pin connector as a key? I think JC Whitney used to sell them. I used to hide a little switch that disabled the FI relay in my cars. Car would crank and work fine but just not start.

flyboy 12-01-2007 12:48 PM

Try this instead:
http://www.digitalguarddawg.com/Prod...tallation.html

Hit the kill switch to shut the bike and walk away; the system arms itself. Who needs keys!

The CyberPoet 12-01-2007 03:22 PM

A simply toggle switch as a kill-switch under the seat would work as well as removing that wiring, and would mean two locks to have to defeat (the ignition and the seat lock).

Cheers,
=-= The CyberPoet

hougy 12-01-2007 05:18 PM

Very true cyber. I was thinking about that as I was leaving my auto store and learned they didn't have anything for the original method I was talking about. What kind of toggle switch would work, a through-switch (where the wire goes straight through the tube, but is split in the center and is controlled via a throw switch/tightening connection)??


All times are GMT -5. The time now is 02:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright www.katriders.com 2004-{2}