Need help I have a 92 katana 600 bored to 20 over extended swing arm wires were all chopped up and ignition. Is knocked out other then that it seems all in all good project only thing is cant get it to start it will fire off of the plugs and backfire but won't crank any help would be appreciated
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Has the bike been running in your possession yet or did you just get it not running? The first thing would be to fix up the wires and the next step would be to probably clean the carbs following carbs 101also the plugs may be sparking but a new set would tell you if they were the issueLast edited by Dylan Katanabruin; 08-01-2019, 02:24 PM.
-
With the harness chopped, I would consider if the coils are wired correctly for signal and power.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment