Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

95 kat 600 project build lots of pictures

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 95 kat 600 project build lots of pictures

    Well i joined the site to have the resources while building this bike and so far so good. This site seems to have alot of info and helpful people. Here is my build. I bought 3 bikes in hopes of building one good one. From the looks of it i am only missing a few parts and Im hoping when I get closer to having a complete bike to sell off the extra parts that i have to buy the remaining parts that i need. I got a 98 with a bent from but good motor and tranny, along with 2 95 frames. I got the bikes and all the parts home yesterday and wasted no time last night ripping right into the project. In about 2 hours I stripped the 98 to pretty much a bare frame. I put it out this morning any rolled the 95 frame in to start rebuilding. Here are some pics of what ive got done so far.


    Last edited by joshr08; 04-30-2009, 07:48 AM. Reason: Automerged Doublepost

  • #2
    Little update I have the motor swapped into the 95 frame bolted right in like i was told it would. now I just have to get everything else mounted up. Man do i love working on bike.

    Comment


    • #3
      Aswesome start!... Looking forward to the updates as you can.

      Krey
      93 750 Kat



      Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736

      "I've done this a thousand times before. What could possibly go wron.... Ooops!"

      Comment


      • #4
        Sounds like fun, stay at it and get her on the road
        2002 GSXF 750

        Comment


        • #5
          Here she is sitting back on 2 wheels motor is in and ill work on getting the FE all put together tonight included bars and all electrical that i have on hand right now. This bike is only going to have a little plastic and mostly be a streetfighter look because i didnt get any plastic other then the tail plastic with the bike. Heres a few pics after i got the motor in and the center stand off the 98 so i could get the bike sitting upright to work on.



          Last edited by joshr08; 04-30-2009, 10:12 AM. Reason: Automerged Doublepost

          Comment


          • #6
            if you got post98 wheels they will fit
            Chrome Project Part 1
            http://www.freewebs.com/mreedohio/

            Chrome Project Part 2

            http://katriders.com/vb/showthread.php?t=91192

            Chrome Project Part 3
            http://katriders.com/vb/showthread.php?t=91192&page=30

            Chrome Project Finished
            http://katriders.com/vb/showthread.php?t=107586

            Comment


            • #7
              i have a post front but only pre rears. so its going to get pre front and rear and im going to sell the post front wheel unless it will fit my 05 gs that already has a post rear wheel swap that i did about 3 months ago.

              Comment


              • #8
                it might work, give it a try
                Chrome Project Part 1
                http://www.freewebs.com/mreedohio/

                Chrome Project Part 2

                http://katriders.com/vb/showthread.php?t=91192

                Chrome Project Part 3
                http://katriders.com/vb/showthread.php?t=91192&page=30

                Chrome Project Finished
                http://katriders.com/vb/showthread.php?t=107586

                Comment


                • #9
                  I'm pretty sure the GS and Kat share the same front wheels. It should work.

                  Krey
                  93 750 Kat



                  Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736

                  "I've done this a thousand times before. What could possibly go wron.... Ooops!"

                  Comment


                  • #10
                    yeah i think it should as well ill prolly just sell the post rim off what are they worth anywhats. i polished my gs wheel already and did a custom paint on it as well and dont want to have to do another wheel for it.

                    On the gsxf im having a hard time desiding what headlight setup i want to go with and how i want to do my gauges since im not putting the front fairing on im not sure how to do my gauges so they arent sticking out like a sore thumb.I do how ever have this biek almost all put together already.

                    Comment


                    • #11
                      Well i mounted the clip ons, gauge cluster (altho i dont like the looks of it) Im looking for a cheap post gauge cluster. Im going to use some headlights from advanced auto and just wire them in so 1 light is on for low beam and then when you flip highs on both lights will be on. Im getting closer to having the bike put together with the amount of parts that i have right now and then ill have to make a list of parts that i need and a list of parts that are extras.

                      Comment


                      • #12
                        did you see this??
                        http://katriders.com/vb/showthread.php?t=91192
                        those are older gixer headlights
                        TDA Racing/Motorsports
                        1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
                        Who knows what is next?
                        Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
                        Please look at this build! http://katriders.com/vb/showthread.php?t=91192

                        Comment


                        • #13
                          I havent seen that thread but looks pretty nice. I actually think im going to get a set of driving lights from the local auto parts store and set them up so one light is on for low beam and then both will be on for high beam. As soon as i get them and mounted on the bike ill get some pics up.

                          Comment


                          • #14
                            Well Im slowly getting parts put back on the bike and getting a list of things im going to need and a list of parts that i dont need and hope to sell. I am hoping to have the lists put together tonight or tomorrow and hope to get them posted.

                            Comment


                            • #15
                              pegs are in and mounted on the bike. rear gas tank mount is on, exhaust came in yesterday and i got the header mounted up looks great. 06 full stock exhaust. it was a super ebay find only cost me 70 bucks on ebay for the whole thing shipped to my house. Im working on a gauge cluster setup now. Ill get some more pics as soon as i get the gauges mounted the way i want.

                              Comment

                              Working...
                              X