Anyone know what mods you can do to the motor to get more HP out of it. I know rejet and pipe it, looking to get more HP out of it. NO NOS. Been around bikes and cars all of my life, just don't know what is out there for the katana. Mine is a 2001 model. Also anyone make parts to put this thing on a diet.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
I built the 600 motor with just about every bolt on and still only got 75rwhp
No replacement for displacement
go for 750,1127 or 1200 swap if your looking for more HP
If you don't want to do a engine swap then FP Stage 1 Jet Kit,FP 5 Degree Ignition Advancer,FP Shift Kit(won't give you HP but will save your tranny), Grind out the welds on your header, Slip On, Chain and Sprockets, GSXR750 cams, Stock Air Filter. Not much more you can do after that really with a 600 unless you go all out ArsenicChrome Project Part 1
http://www.freewebs.com/mreedohio/
Chrome Project Part 2
http://katriders.com/vb/showthread.php?t=91192
Chrome Project Part 3
http://katriders.com/vb/showthread.php?t=91192&page=30
Chrome Project Finished
http://katriders.com/vb/showthread.php?t=107586
-
Originally posted by mreedohio View PostNot much more you can do after that really with a 600 unless you go all out Arsenic
Comment
-
no replacement for displacement is right. I have a 600 punched to 793 cc's. I only had to get a 1991 GSXR 750 cylinder block and custom made 72mm pistons to do that. It cost about $2,500. I also got a 750 head ported and machined, and I did ALL the work (except machining and the over bore) myself. I also got $800 dollar Crower con rods. So you can do all kinds of things to a 600 platform. Let me rephrase, I can do all kinds of things to a 600 platform. I also had to bore the crankcase to make the cylinder block fit.Last edited by arsenic; 06-12-2009, 10:15 PM.
Comment
-
I am doing Chris's head right now & CP Pistons is making the pistons for it. Crower is making the rods right now also. I am also having Cam Motion make a custom grind cam set for it too & this bike should see close to 130 at the back wheel & be "ride across the country" reliable. Ray.85GS1150E 83GS1100SD 83GS1100ES 82GS1000SZ 96GSXR1500DRAGBIKE 96GSXR1400DRAGBIKE 90GSXR1166DRAGBIKE 05SDG110PITBIKE & 8 QUADS!!! "Life is tough! It's even tougher when you're stupid!" John Wayne
Comment
-
What Ray and Arsenic are doing with his 600 is the ultimate for a 600!TDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
Comment
-
yes, yes it is. It doesn't get more modded then that. If it did, I would do it.
oh, and the $2500 I gave Ray doesn't include the cost of the 750 head and the 91 GSXR cylinder block. That was another ~$450. So yeah, you can make a 600 have MORE horse power than a stock Katana 1100. Can you do it for $1 dollar. Uuummm...NO.Last edited by arsenic; 06-12-2009, 10:13 PM.
Comment
-
Originally posted by sharpie6 View Posttry running a search for this topic. It's been covered a lot.
Comment
Comment