fishe help

[rexazz2]

I have handle bar bracket movement on my 04 750
so I look at the fishe and decide that I need item 11 part#56240-08F00
Do you think that is just one rubber or a set of eight for $20?
<a href="http://fiche.ronayers.com/Index.cfm/...roup/HANDLEBAR" target="_blank"><img src="http://images.ronayers.com/fiche/thu...umb_254380.gif" alt="HANDLEBAR" title="Click to view Online Microfiche for Suzuki 2004 GSX750F KATANA HANDLEBAR at Ronayers.com" border="0" /></a>

[Sundowner]

personally - i would call ronayers and find out- knowledge is power

[Astro4x4]

$20 seems outrageous for one, but in my dealings with OEM parts, a part number is for 1 piece of 1 item. I'm going to Suzuki tomorrow to order a sender gasket for my fuel tank, I can ask for ya. Blows that it doesn't show the required quantity in the right column.

[rexazz2]

I was into the local dealer a week and a half ago
they said their part # required 8 but had no price or availability
He said he would have to contact suzuki and get back to me
THEY SO SUCK TO DEAL WITH !!!

[Astro4x4]

SIT DOWN BEFORE READING FURTHER !!!!!



Had to place a call to Suzuki distribution to get a price and quantity answer, my parts guy rocks. OK, they are $37.17 CDN each and you require 8 = $297.36 before taxes !!!!! You know any machinist types? You could probably cut some out of polyurethane or switch to a 600 triple.

[rexazz2]

SIT DOWN BEFORE READING FURTHER !!!!!



Had to place a call to Suzuki distribution to get a price and quantity answer, my parts guy rocks. OK, they are $37.17 CDN each and you require 8 = $297.36 before taxes !!!!! You know any machinist types? You could probably cut some out of polyurethane or switch to a 600 triple.

MY local dealer sucks dead bears !!!
I am thinking that the poly urethane link kits for the front of most GM sway bars will do just fine