just a thanks!

[jwonton]

I don’t post much. But I’m on here all the time.
So after my valve adjustment and carb re-jetting and cleaning (over the last 2 weeks). I just wanted to say thanks!! to all here for the vast amount of information that's available. Thanks to you all I have done all this work on my own:
changed my oil
changed my plugs
Repaired my plastics
ground out my header welds
installed an after market exhaust
changed my fork oil
installed a 5 degree ignition advancer
installed a 14 tooth front sprocket
Installed a speedo healer
switched to Pirelli strada tires
installed ss brake lines
installed an ivan's jet kit
adjusted the valves
cleaned the carbs
Synced my carbs
As I found all of the hands on help (not to mention pics) here I just wanted to say “THANKS“!
That’s without mentioning all the great advice for buying my leather jacket, pants, gloves, and helmets (newenough rules).
P.S. If you buy a used bike my advice is to check EVERTHING! There were so many simple service things that should have been done that weren’t….or that were done wrong.

[Zepp]

That's awesome!!!

[Trackerrrr]

Good job! It's always a great feeling to do the work yourself and keep the extra cash for goodies.

[Astro4x4]

Awesome. I have a long list of thank you's once my bike is finished. I sure learned a crap load about the her from KR

[The CyberPoet]

Always awesome to hear about a rider who became self-empowered with a bit of knowledge

Cheers,
=-= The CyberPoet

__________________________________________________ ________
CyberPoet's Katana Maintence and Upgrade Parts Offerings
The Best Metal Steel Aluminum Motorcycle Tire Valves in the World, plus lots of motorcycle & Katana (GSX600F / GSX750F) specific help files.

[GytRDunKat]

Awesome, you took a big swing at that machine!

[squiggy]

One thing I enjoy when I do it myself is the intimate knowledge of the mechanics of my bike, let alone the money savings.

[md86]

You're welcome .

[plupien79]

Yet another example of why I need a new job... Congrats on getting all that done...