I got some bent forks on ebay because that lazy pos didn't give me my damper rods back and I needed another set. I sent them to Tmod this time. I'm actually happy ITS_NOT_A_KNIFE didn't give me mine back, cause these are probably done better.
I spent like 10 minuets trying to find were the pre load holes were. The only way I can is if I shine a light down the tube and look inside. I can not tell from the outside. He also de burred the 2 extra 5/16" compression holes I added. Thanks a ton T, I couldn't do half the things I want to do on this project without your help.
Those BTW are damper rods. That rod that in your forks to adjust the pre load, that's just an adjusting rod.
I spent like 10 minuets trying to find were the pre load holes were. The only way I can is if I shine a light down the tube and look inside. I can not tell from the outside. He also de burred the 2 extra 5/16" compression holes I added. Thanks a ton T, I couldn't do half the things I want to do on this project without your help.
Those BTW are damper rods. That rod that in your forks to adjust the pre load, that's just an adjusting rod.
Comment