I got some bent forks on ebay because that lazy pos didn't give me my damper rods back and I needed another set. I sent them to Tmod this time. I'm actually happy ITS_NOT_A_KNIFE didn't give me mine back, cause these are probably done better. 

I spent like 10 minuets trying to find were the pre load holes were. The only way I can is if I shine a light down the tube and look inside. I can not tell from the outside. He also de burred the 2 extra 5/16" compression holes I added.
Thanks a ton T, I couldn't do half the things I want to do on this project without your help.
Those BTW are damper rods. That rod that in your forks to adjust the pre load, that's just an adjusting rod.


I spent like 10 minuets trying to find were the pre load holes were. The only way I can is if I shine a light down the tube and look inside. I can not tell from the outside. He also de burred the 2 extra 5/16" compression holes I added.

Those BTW are damper rods. That rod that in your forks to adjust the pre load, that's just an adjusting rod.
Comment