Need someone to take a pic of Ninja 500 carbs...

[The CyberPoet]

We're trying to put the gf's EX500 back together, and there's a jumble of connectors for the carbs and can't figure out where one routes (the haynes manual is zero help here). Anyone who can get a pic of the carbs in the installed position would be greatly appreciated. Specifically, trying to find where 92059 (NOT 92059A nor 92059B) goes from this diagram:



(reference URL is http://www.ronayers.com/fiche/400_03...60&parent=3280).

HELP?!??

=-= The CyberPoet

[ThAzKat]

It looks like there are two, one on each side going upward. Did you get both of those? If so the one of those T tubes might run from the carbs to the fuel tank.

[ThAzKat]

92059, that one goes to the tank!

There should be a extra vent tube on the tank like a Kat but I could be wrong, you know

http://www.ronayers.com/fiche/400_0339/fuel_tank_ex500-d1/fuel_tank_ex500-d1.cfm?man=ka&groupid=3360&parent=3280

[The CyberPoet]

92059, that one goes to the tank!

There should be a extra vent tube on the tank like a Kat but I could be wrong, you know

http://www.ronayers.com/fiche/400_03...60&parent=3280

No, 92059A goes to the petcock as the fuel-fill for the carbs. 92059 goes ???

Still confused as ever.
=-= The CyberPoet

[ThAzKat]

They both appear to go in about the same location

[ThAzKat]

I sure hope this is some help

[The CyberPoet]

They both appear to go in about the same location

That's at the other end of the tank...

Cheers
=-= The CyberPoet

[ThAzKat]

all I can see at the carbs is a T they go too

[ThAzKat]

What a dilema Bro