Have most of you worked with your existing mud flap to keep the turns and plate or have you gone with an entirely new peice to hold em. If you've worked with the existing one, what did you do?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
I chopped mine off and installed some lockhart/philips blinkers
" The key to Immortality., is first living a life worth remembering." -St Augustine
Comment
-
Originally posted by BeekManReplaced the whole ugly piece of crap with a Metisse eliminator. This was 3 years ago now and I'd still do the exact same mod.Bikes don't kill people, People kill bikes.
Comment
-
Order now since it takes about 8 weeks...
Suzuki Katana: The best underated motersicle in da woild
Comment
-
Get rid of it!!!!
A little bird told me that Mr. Braada Jim would soon have a fender eliminator / undertail kit out soon for the kats.....
Was that little bird wrong?!?!?!
Another thing you could do is cut off the flab with a dremel, hacksaw, really sharp blade, whatever, and then get a Creese bracket, and that will mount your plate and blinkers to your bike...
That is until Jim gets the undertails outKan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
-
-
Just take it to those hich school car washes. Thats the best and easiest way to get your bike clean... and look at what you can't haveKan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
-
Originally posted by SweetLouGet rid of it!!!!
A little bird told me that Mr. Braada Jim would soon have a fender eliminator / undertail kit out soon for the kats.....
Was that little bird wrong?!?!?!
Another thing you could do is cut off the flab with a dremel, hacksaw, really sharp blade, whatever, and then get a Creese bracket, and that will mount your plate and blinkers to your bike...
That is until Jim gets the undertails out
you can also have a certain KR member make you a bracket and send it to you, so you can save even more money !
Comment
-
Dagger, take it slow with those, using a cutting disc, and also, after all is said and done, you'll prolly have to sand it down a bit to get a nice smooth finish.
And wear eye protection, unless you like hot plastics pieces flying in your eye
Still a easy project though!
PM Special K about the Creese Bracket, not sure if he has gotten them in yet or not.Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
Comment