Will a front turn signal from a bandit work in a kat?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by Black_peter View Post...All motorcycle turn signals are 12 volts...
Comment
-
Originally posted by Black_peter View PostReally?
Anything will work with anything..
All motorcycle turn signals are 12 volts.
Most turn signals are on M8 stalks..sigpic
Sometimes life throws you a few curves...lean with it ! !
Comment
-
Last time I checked they both come with stalk-style signals. You can also install flush-mounts and it's pretty common but the stock setup is stalks.
Comment
-
Originally posted by Krusher View PostI'm not talking about the wiring part, I'm talking about the lense/housing part. Kats or bandits do not have stalk turn signals.
Pics of a 2001 Bandit:
So you could fab-up a bracket to mount the stalk-style to the forks, as an example, to run Bandit style signals. The plugs themselves are the same from comparison pictures I've seen on ebay. I was going to do just that as I was going to pull off my fairings but still needed turn signals up front. The rear Bandit turn signals wires are actually longer than than it's own front signal wires. That's what I was going to use, the rear Bandit ones on the front of my Kat.Last edited by squiggy; 05-07-2011, 11:18 PM.
Comment
-
That's weird, I stopped at a local bike shop and he looked up a front signal for a Kat and noticed the bandit signal was about $50 cheaper and the picture shows its molded & contoured just like the kat. Apparently they are not like the kat and his book is WRONG ! No wonder it was $50 cheaper.sigpic
Sometimes life throws you a few curves...lean with it ! !
Comment
-
Comment