Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

need help with vacuum lines

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • need help with vacuum lines

    hello i just purchased this 1989 katana 600. i have got it to the point where it will start and run for a few seconds but it backfire alot to get going so think i am missing some vacuum lines and such was wondering if anyone could help me out and find a diagram or something. i bought the bike non running and mostly apart. thanks for the help

  • #2
    The manual is available for download in mechanics 101. Also the search function is available, use the google option.
    "I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
    spammer police
    USAF veteran
    If your a veteran, join the KR veterans group

    Comment


    • #3
      i have a 92 600 f

      theres a fat 15mm ish vac going to the air filter and a smal vac line from the rear of the petcock to the right hand carb ( number 4) at the top on the right of the carb

      if its the same as mine.

      Comment


      • #4
        There is only 1 vac line port, right side of carb 4, goes to the back of the petcock. Tank lines are either drains or vent tubes, route to the ground. 2 vent lines on the carbs, toward the engine, route over the airbox through the clips to the ground. Now if you have the Cali smog equipment, remove it.
        "I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
        spammer police
        USAF veteran
        If your a veteran, join the KR veterans group

        Comment


        • #5
          http://katriders.com/wiki/index.php?...se_Connections

          Comment

          Working...
          X