hello. 92 750 wont hold a normal idle around 1500 rpm, will hold around 2.3k rpm. everything in the carbs is cleaned out properly but i know i have bad needles and emulsion tubes. could they be responsible for the bikes inability to idle? if the bike is sitting there idling at 2.5k and i lower it it holds around 1.5 for a bit making me happy, then it starts to drop little bit to 1k then it just drops more then stalls quickly.
also while im out riding if it starts to bog down if i open the throttle there is no response. im at wot and teh bike wont rev past 1k and will stall if i let go. eventually a good 20 seconds later it clears up and revs up al the way to redline. im rich right? and its the emulsion tubes right?
also while im out riding if it starts to bog down if i open the throttle there is no response. im at wot and teh bike wont rev past 1k and will stall if i let go. eventually a good 20 seconds later it clears up and revs up al the way to redline. im rich right? and its the emulsion tubes right?
Comment