Announcement

Collapse
No announcement yet.
This is a sticky topic.
X
X

Carbs 102 The video

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carbs 102 The video

    http://vimeo.com/67356693

    Part 2, putting them back together.
    http://vimeo.com/68095261 Carbs 102 Part 2

    http://vimeo.com/68097145 Part 3 setting float height
    Last edited by steves; 01-12-2016, 04:43 PM.
    -Steve


    sigpic
    Welcome to KatRiders.com! Click here to register
    Don't forget to check the Wiki! http://katriders.com/wiki


  • #2
    Extra life.

    Comment


    • #3
      Ever give the owner of those carbs a list of things they still need? He should've sent everything possible with them, what a moron.
      sigpic

      "* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"

      2004 Katana 600 - Bought 01/06/2017

      1993 Katana 600 - Traded for a truck.
      2004 Katana 600 - Gone
      2002 GSX-R600. - Gone

      Comment


      • #4
        We knew going into this you would probably need a few other parts, but I wanted to wait until they were apart to be sure
        -Steve


        sigpic
        Welcome to KatRiders.com! Click here to register
        Don't forget to check the Wiki! http://katriders.com/wiki

        Comment


        • #5
          Yeah, no big deal. Though, Cyndi "spending money" this morning will likely put a dent in things. Just get me a list, or price for the parts. Probably be easier and quicker to just send you the money and have you order them instead of shipping them to me, then to you.
          sigpic

          "* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"

          2004 Katana 600 - Bought 01/06/2017

          1993 Katana 600 - Traded for a truck.
          2004 Katana 600 - Gone
          2002 GSX-R600. - Gone

          Comment


          • #6
            Yeah, had to ask Chris a question about some orings, I think the damage is going to be around $20
            -Steve


            sigpic
            Welcome to KatRiders.com! Click here to register
            Don't forget to check the Wiki! http://katriders.com/wiki

            Comment


            • #7




              Awesome!
              1998 Katana 750
              1992 Katana 1100
              2006 Ninja 250

              2006 Katana 600 RIP - 130k miles

              Comment


              • #8
                I'll take feedback from anyone that's watched it. I have noticed that it's sort of hard to see what I'm doing with my hands... which could be a problem. I'm going to try and test some things out for the reassmbly video.
                -Steve


                sigpic
                Welcome to KatRiders.com! Click here to register
                Don't forget to check the Wiki! http://katriders.com/wiki

                Comment


                • #9
                  I have a pre kat, but this was still very informative, one thing I would say is give that smaller camera a second and I think it'll focus on the close ups better then with the main camera, but all in all, great stuff.

                  Comment


                  • #10
                    Maybe a monitor that you can see what's going on as well. You did kind of just flash the parts in front of the camera quickly. Want me to come over and operate the vid cam? I mean, it's ONLY a few hours away.
                    sigpic

                    "* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"

                    2004 Katana 600 - Bought 01/06/2017

                    1993 Katana 600 - Traded for a truck.
                    2004 Katana 600 - Gone
                    2002 GSX-R600. - Gone

                    Comment


                    • #11
                      Thanks for taking the time to make the video.

                      Comment


                      • #12
                        Originally posted by Pa Kat View Post
                        Maybe a monitor that you can see what's going on as well. You did kind of just flash the parts in front of the camera quickly. Want me to come over and operate the vid cam? I mean, it's ONLY a few hours away.
                        Some of that may have been an effect of the video compression.
                        -Steve


                        sigpic
                        Welcome to KatRiders.com! Click here to register
                        Don't forget to check the Wiki! http://katriders.com/wiki

                        Comment


                        • #13
                          I thought Black_Peter's fork disassembly video was pretty good. The camera is centered facing a work bench. He stands behind the bench and just goes to work on the forks. I like the placement of the camera- slightly above bench level pointing slightly down. The layout makes things very easy to see in my opinion.
                          Extra life.

                          Comment


                          • #14
                            I'll try something a little different. I'm sort of limited on camera angles because of how my work bench is situated.
                            -Steve


                            sigpic
                            Welcome to KatRiders.com! Click here to register
                            Don't forget to check the Wiki! http://katriders.com/wiki

                            Comment


                            • #15
                              this is going to come in really handy for a lot of people. thank you!
                              previous rides
                              06 kat 600, 04 Triumph ST Streetfighter, 07 Vstar 1100, 03 GSXR 750, 03 Hayabusa, 07 SV 1000 , 02 Bandit 1200s, Current ride - 07 Roadliner 1900,
                              next ride - another kat

                              Comment

                              Working...
                              X